Frameless SMT Stencils - Slic™
|
| INTRODUCTION |
Frameless Stencils are laser cut stencils designed to work with stencil tensioning systems also known as Reusable Stencil Frames like the Vector-Guard, Quick Tension, Tetra. These solder paste stencils do not need to be permanently glued in a frame.
Frameless Stencils are significant less expensive than Framed Stencils and reduce storage space requirements.
Frameless Stencils are designed for screen printing on printed circuit boards. They are recommended for prototype printed circuit board assembly or short runs. Our Frameless Stencils provide optimum solder paste volume control. They have smooth aperture walls and can be used for 16 Mil pitch and below and for Micro BGA's.
|
| MATERIAL |
The Slic™ material has been proven to outperform the industry standard stainless steel material. Slic™ has the mechanical and thermal properties of industry standard stainless steel, yet offers superior paste release due to the makeup of this material. Print studies have verified improved paste roll activation, smoother walls and better release. Further study results show significant improvements to aperture wall smoothness, which translates to enhanced printed deposits.
Slic™ stencils incorporate a base material with a denser grain structure that results in fewer voids, smoother aperture walls, and provides the same tensile and yield strength as stainless steel material. Slic™ significantly outperformed the standard stainless steel and alloy/invar material available in most of today’s stencils.
Slic™ stencils have repeatability of ±16 µm and are suitable for applications with surface area ratios of 0.55 and above. Featuring a positional accuracy of ±12.5 µm (over 600 x 600 mm) and an aperture dimensional tolerance of ±9 µm, the following standard material thicknesses are available: 0.004, 0.005, 0.006, 0.007, 0.008, 0.009 and 0.010". Additional thicknesses are available upon request.
|
|
STOCK THICKNESSES |
SPECIFICATIONS |
| Foil Thickness |
Material |
| 0.003" |
Slic™ |
| 0.004" |
Slic™ |
| 0.005" |
Slic™ |
| 0.006" |
Slic™ |
|
| Technology |
100% Laser Cut |
| Material |
Slic™ |
| Stencil Thickness |
0.002" - 0.016" |
| Minimum Cut Width |
0.002" |
| Maximum Size |
29" x 29" |
| Aperture Tolerance |
Within 0.00025 |
| Allow for Fiducial Data |
Yes |
| Allow for Panelized Data |
Yes |
|
|
AVAILABILITY |
We fabricate Framed SMT stencils for all variety of stencil printers. Fine
Line Stencil combines exceptionally quick turnarounds to deliver optimized print deposit consistency.
For More information about this product please visit: www.finelinestencil.com |
|