PrintMaster Squeegee Blade
|
| INTRODUCTION |
| Fine Line Stencil's PrintMaster blades
are stainless steel with a precision honed edge and polished blade face which
addresses the rheology problems associated with less dense, lead-free and no-clean pastes. These pastes have a tendency to cling to conventional unpolished blades, resulting in paste hang-up at the end of the print stroke, thereby reducing the paste bead on subsequent print strokes. This improved paste-roll characteristic, aided by reduced surface tension, also extends the printing life of the paste. The precision honed edge reduces the wiping pressure required, extending the life of the stencil and blade. |
| MATERIAL |
| The PrintMaster™, is solid stainless
steel and will not chip or flake as coated blades do. This allows the
PrintMaster™ blade to remain sharp longer and prolongs stencil life. |
|
ATTRIBUTES |
PRINTING |
- 100% Stainless Steel
- Will not chip or flake
- Low wiping pressure
- Long blade life
- Enhanced stencil life
|
By using smooth, low surface energy, precision honed sharp blade edge, the
ideal printing environment is achieved. Thus lower print pressure will
be required. Higher print speeds can be obtained. Longer blade life and
stencil life will be observed because there is much less stress on both
blade edge and stencil. |
|
AVAILABILITY |
We fabricate squeegee blades for all variety of printers. Fine Line Stencil combines exceptionally quick turnarounds to deliver optimized print deposit consistency.
For More information about this product please visit: www.finelinestencil.com |
|
DESIGN CONSIDERATIONS |
If tooling holes are required please utilize the figure below to complete the order information. If no holes are required, only the length (L) and width (W) dimensions are necessary.
 |
|